Technical Bulletins
Up to date product information, solutions and best practices are addressed in our technical bulletins. Need a solution – call us at 1 800 887 4708
Structa Wire Laths comply with DSA and CBC requirements
DSA has issued Bulletin IR 25-4 titled ‘Self-Furring Lath 2019 CBC’ that was Revised 06/14/23 Under 2022 CBC. They state, “This interpretation of Regulations (IR) clarifies the acceptance of self-furring wire lath used as reinforcement for cement plaster on construction projects under DSA jurisdiction”. Structalath III, Structalath Twin Trac 2.5, Structa Mega Lath,
Extra Galvanizing at The Nose Wire for Improved Corrosion Resistance
Corrosion of steel laths in stucco plasters is an ongoing concern. All Structa Wire Laths and Corner reinforcement products are manufactured from wire that is Class 1 hot galvanized coating to provide corrosion resistance. Class 1 (55 gsm) is the ASTM and building code standard for wire products. For added
Upgrade to VTruss Walls & Ceilings for Higher Windloads
We are pleased to announce an improvement to our V Truss Walls & Ceilings product with addition of Twin Trac wires at every truss. V Truss for Walls & Ceilings was originally designed to improve the performance of stucco on overhead surfaces with key elements that work together to provide
Technical Bulletin 101 – Note to Wire Tying Exemption
Structa Wire laths do not require wire tying of side laps as specified in Section 7.3.2.1 of ASTM C1063. There is no limit on maximum overlap distance in either direction. NOTE: In situations where the two courses of the lath are not laying flat and in close proximity of the
Recommended Fastening VTruss Walls & Ceiling Lath
Issued: July 2015 – Revised June 2020 VTRUSS Walls & Ceilings or Structa Rib Lath is designed for superior performance of stucco on overhead surfaces. To determine best installation practices Structa Wire has conducted tests on direct attachment of soffit laths to wood framing, without sheathing. Two lath types
STORAGE OF STRUCTA WIRE LATH PRODUCTS
All Structa Wire lath products are galvanized in accordance with ASTM standards and building codes. However, if any galvanized products are not stored correctly and come in contact with moisture for extended periods during storage, they can be affected by corrosion, starting with white rust and potentially progressing to red