Heaviest Wire Lath Available

Less Metal
More Strength

Mega Lath

Mega Lath is a self-furring welded wire that provides heavy-duty reinforcing for both stucco and stone installation. Mega Lath is an engineered product that provides easy attachment for both wood and steel construction. Specifically designed for stucco applications that require extra reinforcing, Mega Lath can be used as an alternative to 3.4 lb/yd2 diamond mesh metal lath specified in ASTM C 847 and at 1.95 lb/yd2, Mega Lath can be installed 24″ OC over open framing. Mega Lath is recommended wherever 2.5 or 3.4 metal sheet lath is specified.

New Innovative Product

Mega Lath is made with less metal but has more strength than any other product available – including sheet lath products
It is engineered to meet weight requirements for architectural stone product installations

Design Features

Dense product is made from 17 ga. galvanized steel wire welded to form 0.7 inch x 1.5 inch openings
Its design promotes uniform plaster thickness
A series of flat-bottomed V-shaped furrs ensure a full 3/8″ scratch coat
Furr will not puncture the vapour barrier
Additional cold-rolled longitudinal wires form a twin track that simplifies attachment, for greater productivity and job satisfaction
The cold-rolled technology produces flat wires that reduce curvature memory, for an easy-to-handle roll
Rolls are more manageable than sheet products and make for easy installation

Our Products

V Truss Corners

V Truss Walls
& Ceilings

Rolls out flat and stays flat

Structalath No. 17 1- 1/2" x 1-1/2" SF CR II is a welded wire lath engineered to enhance the performance of stucco cladding. Structalath reduces cracking and increases stucco embedment. Flattened line wires are integrated into the product to prevent damage to the vapour barrier and make the rolls easy to handle on the job-site with no spring back.

For steel and wood framing

Twin Trac features all of Structalath’s benefits with the addition of eight secondary cold-rolled longitudinal wires, adding weight and strength to create a ‘track’ that acts as a continuous washer for easy penetration of self-tapping screws, hand nails and a flat base for automatic staples. Twin Trac can be substituted wherever 2.5 metal lath has been specified.

Less metal, more strength

MegaLath is a dense and heavy-duty reinforcing product that weighs 1.95 lbs/yd2. MegaLath includes the Twin Trac feature as well as additional line wires for an extra-strong cement plaster base. It is approved for use on commercial and institutional projects and wherever 3.4 lb/yd2 diamond mesh metal lath has been specified. Mega Lath can also be installed 24" OC over open framing.

Straight and true corners

Structa V Truss Corner is engineered to provide superior reinforcement for stucco corners. The Truss design provides greater strength, ease of installation and increased embedment. With lots of nailing opportunities and the twin trac on edges, it increases rigidity. It is available in Bullnose, One Coat and Three Coat. Our loop design is exclusive to our specialty profiles: short Flange Bullnose Short Flange and Arch.

For Overhead Applications

V Truss for Walls & Ceilings is a stiff sheet product that is self-furred and is approved for use in place of 3.4 rib lath. VTWC improves the performance of stucco on overhead surfaces and eliminates the frustrations of overhead applications such as falling stucco, stucco build up at laps and poor embedment. Easy to install, this product assures a smooth 'crack free' soffit.

Warranted Systems

Structa Wire products are included in warranted systems:

Master Wall Joint Warranty
• Master Wall – Cemplaster with Structalath Twin Trac
• Master Wall – Cemplaster with Mega Lath

Our Products

Rolls out flat and stays flat

Structalath No. 17 1- 1/2" x 1-1/2" SF CR II is a welded wire lath engineered to enhance the performance of stucco cladding. Structalath reduces cracking and increases stucco embedment. Flattened line wires are integrated into the product to prevent damage to the vapour barrier and make the rolls easy to handle on the job-site with no spring back.

For steel and wood framing

Twin Trac features all of Structalath’s benefits with the addition of eight secondary cold-rolled longitudinal wires, adding weight and strength to create a ‘track’ that acts as a continuous washer for easy penetration of self-tapping screws, hand nails and a flat base for automatic staples. Twin Trac can be substituted wherever 2.5 metal lath has been specified.

Less metal, more strength

MegaLath is a dense and heavy-duty reinforcing product that weighs 1.95 lbs/yd2. MegaLath includes the Twin Trac feature as well as additional line wires for an extra-strong cement plaster base. It is approved for use on commercial and institutional projects and wherever 3.4 lb/yd2 diamond mesh metal lath has been specified. Mega Lath can also be installed 24" OC over open framing.

V Truss Corners

Straight and true corners

Structa V Truss Corner is engineered to provide superior reinforcement for stucco corners. The Truss design provides greater strength, ease of installation and increased embedment. With lots of nailing opportunities and the twin trac on edges, it increases rigidity. It is available in Bullnose, One Coat and Three Coat. Our loop design is exclusive to our specialty profiles: short Flange Bullnose Short Flange and Arch.

V Truss Walls & Ceilings

For Overhead Applications

V Truss for Walls & Ceilings is a stiff sheet product that is self-furred and is approved for use in place of 3.4 rib lath. VTWC improves the performance of stucco on overhead surfaces and eliminates the frustrations of overhead applications such as falling stucco, stucco build up at laps and poor embedment. Easy to install, this product assures a smooth 'crack free' soffit.

Warranted Systems

Structa Wire products are included in warranted systems:

Master Wall Joint Warranty
• Master Wall – Cemplaster with Structalath Twin Trac
• Master Wall – Cemplaster with Mega Lath