VIDEOS

Check out our videos to see our factory plant and products in action.

RESOURCES

Structa Wire provides a knowledgeable resource on the most up-to-date industry standards.

Our Products

ROLLS OUT FLAT AND STAYS FLAT

Structalath No. 17 1- 1/2″ x 1-1/2″ SF CR II is a welded wire lath engineered to enhance the performance of stucco cladding. Structalath reduces cracking and increases stucco embedment. Flattened line wires are integrated into the product to prevent damage to the vapour barrier and make the rolls easy to handle on the job-site with no spring back.

FOR STEEL AND WOOD FRAMING

Twin Trac features all of Structalath’s benefits with the addition of eight secondary cold-rolled longitudinal wires, adding weight and strength to create a ‘track’ that acts as a continuous washer for easy penetration of self-tapping screws, hand nails and a flat base for automatic staples. Twin Trac can be substituted wherever 2.5 metal lath has been specified.

LESS METAL, MORE STRENGTH

MegaLath is a dense and heavy-duty reinforcing product that weighs 1.95 lbs/yd2. MegaLath includes the Twin Trac feature as well as additional line wires for an extra-strong cement plaster base. It is approved for use on commercial and institutional projects and wherever 3.4 lb/yd2 diamond mesh metal lath has been specified. Mega Lath can also be installed 24″ OC over open framing.

MegaLath9225__1465418403_89963

STRAIGHT AND TRUE CORNERS

Structa V Truss Corner is engineered to provide superior reinforcement for stucco corners. The Truss design provides greater strength, ease of installation and increased embedment. With lots of nailing opportunities and the twin trac on edges, it increases rigidity. It is available in Bullnose, One Coat and Three Coat. Our loop design is exclusive to our specialty profiles: short Flange Bullnose Short Flange and Arch.

FOR OVERHEAD APPLICATIONS

V Truss for Walls & Ceilings is a stiff sheet product that is self-furred and is approved for use in place of 3.4 rib lath. VTWC improves the performance of stucco on overhead surfaces and eliminates the frustrations of overhead applications such as falling stucco, stucco build up at laps and poor embedment. Easy to install, this product assures a smooth ‘crack free’ soffit.

WARRANTED SYSTEMS

Structa Wire products are included in warranted systems:

Master Wall Joint Warranty
• Master Wall – Cemplaster with Structalath Twin Trac
• Master Wall – Cemplaster with Mega Lath

structalath_button

Structalath
 

twintrac_button

Twin Trac
 

megalath_button

Mega Lath
 

vtruss_corner_button

V Truss Corners
 

vtruss_walls_ceilings_button

V Truss Walls & Ceilings

systems_button

Systems
 

ROLLS OUT FLAT AND STAYS FLAT

Structalath No. 17 1- 1/2″ x 1-1/2″ SF CR II is a welded wire lath engineered to enhance the performance of stucco cladding. Structalath reduces cracking and increases stucco embedment. Flattened line wires are integrated into the product to prevent damage to the vapour barrier and make the rolls easy to handle on the job-site with no spring back.

FOR STEEL AND WOOD FRAMING

Twin Trac features all of Structalath’s benefits with the addition of eight secondary cold-rolled longitudinal wires, adding weight and strength to create a ‘track’ that acts as a continuous washer for easy penetration of self-tapping screws, hand nails and a flat base for automatic staples. Twin Trac can be substituted wherever 2.5 metal lath has been specified.

LESS METAL, MORE STRENGTH

MegaLath is a dense and heavy-duty reinforcing product that weighs 1.95 lbs/yd2. MegaLath includes the Twin Trac feature as well as additional line wires for an extra-strong cement plaster base. It is approved for use on commercial and institutional projects and wherever 3.4 lb/yd2 diamond mesh metal lath has been specified. Mega Lath can also be installed 24″ OC over open framing.

MegaLath9225__1465418403_89963

STRAIGHT AND TRUE CORNERS

Structa V Truss Corner is engineered to provide superior reinforcement for stucco corners. The Truss design provides greater strength, ease of installation and increased embedment. With lots of nailing opportunities and the twin trac on edges, it increases rigidity. It is available in Bullnose, One Coat and Three Coat. Our loop design is exclusive to our specialty profiles: short Flange Bullnose Short Flange and Arch.

FOR OVERHEAD APPLICATIONS

V Truss for Walls & Ceilings is a stiff sheet product that is self-furred and is approved for use in place of 3.4 rib lath. VTWC improves the performance of stucco on overhead surfaces and eliminates the frustrations of overhead applications such as falling stucco, stucco build up at laps and poor embedment. Easy to install, this product assures a smooth ‘crack free’ soffit.

WARRANTED SYSTEMS

Structa Wire products are included in warranted systems:

Master Wall Joint Warranty
• Master Wall – Cemplaster with Structalath Twin Trac
• Master Wall – Cemplaster with Mega Lath

Find our products at a dealer near you by checking our comprehensive dealer list

Find our Products at Building Supply Dealers throughout North America

OUR PARTNERS